The two forms
| Form | Catalogue listing |
|---|---|
| Sterilization light bars | Four-piece sets |
| Lamp-tube modules | Type 1 / Type 2 |
The catalogue lists the two forms separately: sterilization light bars as four-piece sets, and lamp-tube modules as Type 1 and Type 2. Which form a design uses, and what configuration is quoted for it, is confirmed against the enclosure geometry in the quotation exchange.
Specifying against an enclosure
The catalogue's light-bar set is the form named for case sterilization. Where a product's cavity geometry is already fixed, state that geometry in the enquiry; the form and configuration are confirmed against it in the quotation exchange.
Specifying a light bar or lamp tube
Both forms are specified against geometry. Send the enclosure or duct dimensions, the load or cross-section the field must cover, the target cycle time and the band. Bar count and placement, or the tube type, are then quoted against that geometry, and the module configuration is confirmed with the quotation. Ask what documentation exists for the configured model — which ratings are recorded for it — in the same exchange. For enclosed products, include how the load is presented inside the enclosure — hung, racked or laid flat — among the inputs in the same message. State the band the design is built around alongside the geometry, so the confirmation answers the configuration the product will actually build, against the enclosure dimensions supplied in the same message.
Design notes for the two forms
State the bar geometry, the working distances and the load presentation in the enquiry. The interior materials of the enclosure are part of the design the configuration is quoted against. The emitter stage is specified for integration with the product's own drive and interlock design; the finished product's safety classification remains the equipment maker's validation.
Sets, spares and product families
The catalogue lists light bars as four-piece sets — the set is the listed unit for this form. How a set is constituted for a configured model is confirmed in the same exchange that confirms the configuration.
Are light bars and lamp tubes interchangeable in a design?
The two forms are listed separately in the catalogue. An enquiry names the form the design is built around, and the configuration is confirmed against your enclosure dimensions in the quotation exchange.
The catalogue record for the two forms
The module catalogue lists a case-sterilization light-bar product supplied as a set of four bars, and two lamp-tube module types, listed as Type 1 and Type 2, alongside the static water module and the J801 and J804 models. An enquiry for either form states the enclosure or duct dimensions, the load or cross-section the field must serve, how the load is presented inside the enclosure, the target cycle time, the band the design is built around and the quantities — the inputs the configuration is quoted against.
An enquiry for either form, assembled
Assembled in one message, an enquiry for either form states the enclosure or duct dimensions, how the load is presented inside the enclosure, the target cycle time, the band the design is built around, and the quantities with programme timing.
Request a quotation
Tell us the wavelength, package format and quantity you are sourcing. Minimum order quantities and lead times are confirmed per product line in the quotation, against the named model and the quantities the enquiry states.
Send an Enquiry