UVC LED in HVAC and Air-Conditioning Equipment

The integration setting

The enquiry for this setting states the duct or air-handler cross-section, the airflow range and the duty schedule. Air-conditioning equipment appears in the company's published application cases, and the module programme behind the setting is the air disinfection module range.

What an enquiry states

• Zone geometry: the duct or coil cross-section available to the stage, and the emitter layout shaped to that cross-section.
• Exposure time: state the airflow range in the enquiry, including the highest flow the system runs.
• New design or retrofit: an HVAC brief may re-specify an existing lamp-era stage; whether the brief takes a lamp-tube form or another emitter layout is taken case by case against the enclosure, in the enquiry exchange.
• Thermal environment: state the temperature range and the duty schedule the system runs in the enquiry; the drive and thermal configuration are confirmed against them per model in the enquiry exchange.
• Service model: state the access provisions and the service interval the installation works to in the enquiry; emitter positions and access for the configured model are confirmed in the enquiry exchange.

What the component side confirms

The equipment maker or system designer owns the installation's performance claims. The component exchange confirms the module configuration against the duct geometry and duty, the band and rated drive, and what documentation exists for the configured model. Send the duct cross-section, airflow range, target band and whether the brief is a new enclosure or a retrofit; module configuration is confirmed with the quotation.

Stating the setting

An enquiry states which setting the brief belongs to, alongside the duct cross-section, airflow range and duty schedule it carries.

Controls, monitoring and building duty

When the brief includes controls integration, describe the duty logic the system will run in the enquiry: drive and thermal configuration are then specified for the real cycle — occupied hours, setback periods and boost events.

Can an LED stage replace a lamp stage in an existing air handler?

A replacement is specified against the enclosure drawings: whether a given enclosure supports a re-laid emitter zone, and what configuration it takes, is confirmed case by case in the enquiry exchange.

Stating an HVAC brief

An HVAC brief states the duct or air-handler cross-section available to the stage; the airflow range, including the highest flow the system runs; the duty schedule the building will impose, with its setback and boost periods; whether the brief is a new enclosure or a re-specification of an existing stage, with enclosure drawings where they exist; the service access the maintenance pattern requires; and the target band. Against those inputs, the exchange confirms the module configuration, its band and rated drive, and what documentation exists for the configured model.

The brief, assembled in one message

A complete first message for this setting carries the duct or air-handler cross-section with drawings where they exist, the airflow range including the highest flow the system runs, the duty schedule with its setback and boost periods, the service access the maintenance pattern requires, the target band, and whether the brief is a new enclosure or a re-specification of an existing stage.